Urutau Spring Kit

We are proud to offer manufactured to spec springs for your Urutau! We went over the readme. We found the manufacturer on AliExpress that you are instructed to order from directly. We ordered the spring stock and ensured it was exactly what the Urutau called for. And then, we had them cut out the work for you. Get this spring kit as an upgrade to your already existing build, or just to have as replacements for when the time comes to replace them.
 
Why order our Urutau Spring Kit? 
 
-NO CUTTING TO LENGTH
 
-NO SHARP ENDS OF SPRINGS
 
-Manufacturer produced from exact spring stock/ dimensions that were originally required to be cut to length
 
-Manufacturer produced to the exact specs (coil amounts) that the Urutau Readme lists
 
-Recoil springs are closed ended, common for firearm recoil springs. No more sharp ends from cutting spring stock to length.
 
-All other springs are closed and ground to ensure proper seating of spring and to reduce chance of misalignment during install/ operation
 
-Manufactured springs, both closed, and closed and ground, prevent sharp ends caused from cutting spring stock to length, leading to possible damage during install, as well reduced functionality and overall life of the build.
 
Urutau Spring Kit Information:
 
Spring Material: 65mn
Spring OD: 8mm OD
Wire Diameter: 0.8mm / 1.0mm
Spring Ends: Closed and Ground (Closed only for Recoil Guide Rod Springs)
 
Included in kit:
0.8mm Wire Diameter
1x Spring - 4 coils - Safety Locking Peg/ Bar Spring
1x Spring - 5.5 coils - Rear Iron Sight Spring
2x Springs - 7.5 coils - FCG Disconnector Spring, Rear Cap Locking Tab Spring
 
1.0mm Wire Diameter
1x Spring - 4 coils - Magazine Release Spring
1x Spring - 5.5 coils - FCG Cassette Front Spring
2x Springs - 220mm length - Recoil Guide Rod Springs
 
These springs will be stock in our full Urutau kit once released!